WINCODE LP4 Series, User Manual

Page: 40 / 72

LP4 USER MANUAL
- 40 -
(After printing) user may use this offset settings. Otherwise, the default is 0)
Initial Position
Offset (Before
printing)
Input the required parameters (plus value is feeding more distance;
minus value is back feeding more distance)
Label Direction Label-out from top or Label-out from bottom
Mirror Drawing No effect or mirror reflection (Not available now)
Drawing origin X
axis offset
Input the required parameters (Not available now)
Drawing origin Y
axis offset
Input the required parameters (Not available now)

Media
Item Description
Label Sensor Which sensor is using; Reflective and Transmissive
Sensor Sensitivity Normal/Middle/High are selectable
Label Type Label with Gaps, Label with Black Line, and Continuous label are
selectable
Paper Width (mm) The settings of paper width in the printer
Paper Length (mm) The settings of paper length in the printer
Label Type: Label
with Gaps
Gap Length (mm)
The settings of gap length in the printer
Length after Gap
Input the required parameters (default is 0)
PS: This will be suitable for special shape label
Label Type: Label
with Black Line
Black Line Thickness
The settings of black line thickness in the printer
Length after Black
Line
Input the required parameters (default is 0)
PS: This will be suitable for special shape label
Reflective Sensor
Value
The value of reflective sensor in the printer
Transmissive Sensor
Value
The value of reflective sensor in the printer