WINCODE LP4 Series, User Manual

Page: 33 / 72

LP4 USER MANUAL
- 33 -
Sensor
settings
Sensor type:

Use Current Printer Setting (by previous setting)

Reflective sensor (Recommend)

Transmissive sensor
Start Position Offset: (recommend to input number when the
printing position has a little bit shift up or shift down)
If selected, user can fill up how many dots to adjust the start printing
position.
7.5.3 Sensor Calibration
Sensor
Calibration
Settings

Please run the sensor calibration after the label material has
been changed.

Each time of sensor calibration will feed 15 inches long label
for usage.

Label Type: Label with Gaps, Label with Marks, Continuous
(same setting from Media Settings page)

Sensor: Use Current Printer Settings, Reflective sensor,
Transmissive sensor (same setting from Media Settings page)
Auto Detection
(Recommend)

The printer will start to run the sensor calibration
automatically and will feed 15 inches long label out.
Manual Set

Sensor Strength: Normal, High Sensitive, Ultra Sensitive

Reflective Sensor Value: 15 (default value is 15)

Transmissive Sensor Value: 15 (default value is 15)

The value range of sensor is from 5 to 100, less value is more
sensitive
7.5.4 Options
Item Description
After Print
Use Current Printer Settings: see previous setting
Remove tick option would have below several options