WINCODE LP4 Series, User Manual

Page: 39 / 72

LP4 USER MANUAL
- 39 -
7.7 Settings page in the Printer Utility
Note: This settings page would suggest user for reviewing the current settings in the
printer only. Please be noted that if same settings on the driver settings, the printer
will use driver’s settings as printing priority.

User can use icon to download printer’s settings for review

User can use icon to change the printer’s settings if something has
been revised in the below tables.

Print Job
Item Description
Printing Speed(mm) Select required speed
Printing Darkness Select required parameters from 0 to 15; adjust the printer head
temperature (8 is recommended for wax ribbon)
Device Selection Normal, tear-off, peel-off and cutter modes are selectable.
Printing Mode Direct Thermal and Thermal Transfer modes are selectable
Feed Position Offset Input required parameters. (If printer is connected cutter/peeler,