WINCODE LP4 Series, User Manual

Page: 37 / 72

LP4 USER MANUAL
- 37 -
Printer
Summary
Printer Summary

Listing printer information
Send Command window
Sensor and Paper Size Detection
1. Please run the sensor calibration after the label material has been
changed
2. Each time of sensor calibration will feed 15 inches long label for usage

Auto Calibration: Choose below Label and Sensors types to run this
detecting action. (Recommend)

Manual Settings: Manually select the sensor strength, and also adjust
each sensor value (The value range of sensors is from 5 to 100, less value
is more sensitive), please use this setting when you cannot detect label
gap by Automatically Detect option.

Label Type: Label with Gaps, Label with Black Line, Continuous

Sensors: Reflective (Recommend) and Transmissive

Start Calibration: Please run this calibration after the label material has
been changed, the detect result will be showed in the right table as
below Figure

Paper Size Calibration: Printer will detect the paper size and get
detecting result in the right table as below Figure