WINCODE LP4 Series, User Manual

Page: 20 / 72

LP4 USER MANUAL
- 20 -
5.2 Real Time Clock Battery installation
1. Shut down the power, and then remove the power cord and relevant
connected cables. Open the chassis cover to see the inside motherboard.
2. Push the button located beside battery as below Figure, the battery will be
separated from the motherboard.
3. Place a new battery (model no. CR2032 is recommended) on the original
place and press it until battery fixed in the installation mount.
Note
：
1.) Battery is not included in LP423N and LP433N models but is included in
LP423A and LP433A models.
2.) For LP423A and LP433A models, an insulating piece is placed with battery to
prevent battery consumption and also maintain the lifetime of battery.
3.) Replace battery with the equivalent battery model suggested by
manufacturer.