Page 8 of 49
Document No.: 006020
Revision: P
OWNERS OPERATING & MAINTENANCE MANUAL
PHLEBOTOMY COLLECTION
TOOLS REQUIRED
MODELS 2570, 2571, 2572, 2573, 2574 AND 2575
•
Multiple size wrench included (or suitable 5/16, 3/8” & 7/16” or adjustable wrenches)
•
Phillips-head screwdriver
•
Scissors or box cutter
•
Powered tools not recommended
MODEL 2578
•
Multiple size wrench included (or suitable 7/16” or adjustable wrench)
•
3/16” Hex “Allen” wrench included
•
Phillips-head screwdriver – for checking tightness of all screws after shipping
•
Scissors or box cutter
•
Powered tools not recommended.
MODEL 2580 - ALL CONFIGURATIONS
•
Scissors or box cutter
•
#2 Phillips-head screwdriver (included)
•
Powered tools not recommended
ADDITIONAL TOOLS: MODEL 2580 - CABINET CONFIGURATIONS
•
1/2” Wrench (Included)
ADDITIONAL TOOLS: MODEL 2580 - OPTIONAL FOOTREST
•
Multi-sided wrench (two (2) Included)
•
Carefully examine your product for any damage. Be sure to inspect all components.
IF DAMAGE IS
EVIDENT, CONTACT THE FREIGHT CARRIER OR WINCO IMMEDIATELY!
•
Save all boxes and packing material until
AFTER
you have assembled your product and verified that
all items are accounted for and that everything is functioning properly.
•
Remove all packing material and hardware that was secured for shipping.
•
You may have to cut packaging materials with a box cutter or scissors to access the product. Use
CAUTION
to avoid personal injury or damaging the product.
•
Carefully remove all components and any included tools and/or parts from the carton.
•
Do
NOT
install, maintain or operate this equipment without reading and following this manual
otherwise, injury and/or damage may result.
IF YOU HAVE ANY QUESTIONS OR CONCERNS,
PLEASE CONTACT WINCO MFG., LLC
.
WINCO ASSUMES NO RESPONSIBILITY FOR DAMAGE OR INJURY CAUSED BY IMPROPER ASSEMBLY,
INSTALLATION, USE, OR MAINTENANCE OF THESE PRODUCTS.
BEFORE YOU BEGIN
