Page 11 of 49
Document No.: 006020
Revision: P
OWNERS OPERATING & MAINTENANCE MANUAL
PHLEBOTOMY COLLECTION
ARM ASSEMBLY AND INSTALLATION
FIG 1
1.
If the
Arm Assembly
has not yet been installed, insert it into the
Receiving Tube
on the
Seat Frame
Assembly
.
(FIG. 1)
*
This applies to any style arm assembly
)
*
ALWAYS make sure that the slot in the Arm Assembly faces the Knob installed on the
receiving tube. (FIG. 1)
2.
Then adjust the arm to the desired height and tighten the knob. Screw the Knob into the Slot. This
will “capture” the arm and keep it from being able to be pulled out of the frame accidentally.
DO NOT OVER-TIGHTEN!
The Knob will NOT need to be extremely tight to effectively hold
arms in position.
2570 / 2571
