Page 34 of 49
Document No.: 006020
Revision: P
OWNERS OPERATING & MAINTENANCE MANUAL
PHLEBOTOMY COLLECTION
PIVOT ARM PIVOT-POINT ADJUSTMENT
1.
If you wish to change the standard setup
of the
Pivot Arm
so that the pivot point is
toward the front of the chair, proceed to the
next step. Otherwise, skip this section. If you
ordered a P2 Option, you can choose which
Pivot Arm(s), if any, you wish to alter. This
change may be made before or after Arm
Assembly is installed on the chair.
2.
Use a Phillips or #2 square bit screwdriver to remove the four (4) wood screws on the underside of
the arm assembly that hold the pivot arm assembly onto the steel arm support. (
FIG 1
)
3.
After removing the four (4) wood screws, rotate the pivot arm assembly 180° (
FIG 2
).
4.
Reinstall the four (4) wood screws to secure the pivot arm in the new position.
FIG 1
FIG 2
