Winbook N4, User Manual

Page: 128 / 136

User’s Manual
13. When you boot the computer, the recovery program should start auto-
matically.. If it does not, restart the system and press [F2] to enter
the Setup utility. Set the boot devices so that the CD-ROM, DVD
or Combo drive boots before the hard disk drive. See Chapter 7
if you need more information about the Setup utility. Exit Setup.
The recover program should start now.
14. Your WinBook CD-ROM is designed to automatically recover
a completely blank hard drive.
15. The recovery program will automatically create the primary partition.
When the drive has been formatted, the complete file recovery process
will start and proceed automatically. Your system will now be restored
to the original shipping configuration. You will need to restore any
files and programs created since you purchased the WinBook
notebook.
16. Depending on the backup system that you have, you might need
to load the backup software from your original disks before restoring
your files.
17. Either restore your existing programs, configurations and files from
your backup or reinstall the software from your original disks or CDs.
If you do chose to reinstall from your original disks, you might need
to reset preferences in your programs. It is usually much quicker and
easier to restore from your backup.
128
N4 manual w/no OS 3/7 3/11/02 3:46 PM Page 128