WiMo 6CP10 Operation And Configuration Instructions Download Page 41

Page: 41 / 60

Wimotec Ltd

Measuring and monitoring unit

Technical description

WIMO 6CP10

WM6CP10.EN001

Wimotec 24h support phone +358 (0)20 753 3264

The recorder can be triggered by a digital input. The trig signal

is selected in the output matrix (signal DR). The recording can
also be triggered manually.
When a recording is made, also the time stamp will be

memorized.
The recordings can be uploaded, viewed and analysed with the

VAMPSET program (version 8.x or newer).
For more detailed information about, for example, uploading,

please see a separate VAMPSET manual.

Available links

The following channels can be linked to a disturbance recorder:

•

DO, DI

•

Uline, Uphase

•

U2/U1, U2, U1

•

I2/In, I2/I1, I2, I1, IoCalc

•

CosFii

•

PF, S, Q, P

•

UL3, UL2, UL1

•

U31, U23, U12

•

IL3, IL2, IL1

•

Prms, Qrms, Srms

•

Tanfii

•

THDIL1, THDIL2, THDIL3

•

THDUa, THDUb, THDUc

•

fy, fz, U12y, U12z

NOTE!

The available channels (that is, what signals are measured)

depend on the configuration

Summary of Contents for 6CP10





























































Search results

Summary of Contents for 6CP10

Reviews:

Brands by name

Popular brands

WiMo 6CP10, Operation And Configuration Instructions

Search results

Summary of Contents for 6CP10

Reviews:

Brands by name

Popular brands