WIMO 6CP10
Measuring and monitoring unit
Operation and configuration
Wimotec Ltd
20
Wimotec 24h support phone +358 (0)20 753 3264
WM6CP10.EN001
5.1.
Principle of parameter setting
1.
Move to the setting state of the desired menu (for example
CONF/CURRENT SCALING) by pushing the ENTER key.
The Pick text appears in the upper-left part of the display.
2.
Enter the password associated with the configuration level
by pushing the LEFT and RIGHT keys simultaneously and
then using the arrow keys and the ENTER key (default
value = 0002). For more information about the operating
levels, please refer to 3.2.
3.
Scroll through the parameters using the UP and DOWN
keys. A parameter can be set if the background color of the
line is black. If the parameter cannot be set the parameter
is framed.
4.
Select the desired parameter (for example Inom) with the
ENTER key.
5.
Use the UP and DOWN keys to change a parameter value.
If the value contains more than one digit, use the LEFT and
RIGHT keys to shift from digit to digit, and the UP and
DOWN keys to change the digits.
6.
Push the ENTER key to accept a new value. If you want to
leave the parameter value unchanged, exit the edit state by
pushing the CANCEL key.
Figure 5.1-1.Changing parameters
