Configuring
the RF
Configuring the RF of the 680XXB involves select-
ing the state of the RF during retrace, during fre-
quency switching in CW and step modes, and at
reset and selecting whether a sweep triggered by a
single or external trigger should rest at the top or
bottom of the sweep ramp.
To go to the Configure RF menu from the System
Configuration menu, press
RF
. The Configure RF
Menu (below) is displayed.
Press
Retrace RF
to select RF
On
or
Off
during re-
trace. The display will reflect your selection.
Press
Delta-F RF
to select RF
On
or
Off
during fre-
quency switching in CW or step sweep modes. The
display will reflect your selection.
Press
Ramp Rest
to select 0 or 10 for the ramp
rest point for sweeps that are triggered by a single
trigger or external trigger. 0 indicates that the
sweep will rest at the bottom of the sweep ramp; 10
indicates that the sweep will rest at the top of the
sweep ramp. The display will reflect your selection.
Press
Reset State
to select RF
On
or
Off
at reset.
The display will reflect your selection.
When done, press
Previous Menu
to return to the
System Configuration menu.
LOCAL (FRONT
SYSTEM
PANEL) OPERATION
CONFIGURATION
3-64
680XXB OM
Summary of Contents for 680 B Series
Page 5: ......
Page 11: ...Figure 1 1 Series 680XXB Synthesized CW Generator...
