Step 4
Remove the inner slide assemblies from
the outer slide assemblies.
Step 5
Place the left side inner slide assembly
onto the instrument case with the handle
towards the front of the instrument (Fig-
ure 2-3).
Step 6
Insert two green-headed screws through
the holes in the slide assembly behind the
handle and into the metric tapped holes in
the side of the instrument.
Step 7
Insert two green-headed screws through
the holes near the rear of the slide assem-
bly and into the metric tapped holes in
the side of the instrument.
Step 8
Insert the two SAE threaded screws (re-
moved from the feet) through the 90
°
tabs
on the rear of the slide assembly and into
the rear panel of the instrument.
Step 9
Using the Phillips screwdriver, tighten all
screws holding the left side slide assembly
to the instrument chassis.
Figure 2-3. Rack Mounting Hardware Installation
RACK MOUNTING KIT
INSTALLATION
INSTALLATION
NOTE
The screws with green heads have
metric threads. When it becomes
necessary to replace any of these
screws, always use the exact re-
placement green-headed screws
(WILTRON P/N 2000-560) to avoid
damage to the instrument.
680XXB OM
2-11
Changed: December 1996
Summary of Contents for 680 B Series
Page 5: ......
Page 11: ...Figure 1 1 Series 680XXB Synthesized CW Generator...