background image

4

Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660  or email: [email protected]. Hours: 7 am to 6 pm MST.

In addition, it is important that the Desktop Antenna be positioned so that the logo is not pointed towards the 

Signal Booster or the outside Cradle Antenna, as shown in Figure 3 . The Desktop Antenna is recommended to 

be 18 inches or more away from the Signal Booster as shown below .

never point the outside Cradle Antenna across 

the building toward the Desktop Antenna .  Do 

not let the outside Cradle Antenna and the 

Desktop Antenna (logo side) transmit toward 

each other .

Figure 3

Signal Booster 

with Desktop 

antenna

Cell

Tower

Cradle

antenna

Signal Booster 

with Desktop 

antenna

Cell

Tower

Cradle

antenna

The Wilson Electronics 

insignia on the outside 

Cradle Antenna should 

face 

toward

 the cell 

tower and 

away from

 

the Desktop Antenna .

CORRECT

INCORRECT

Position the Desktop Antenna with the logo 

on the antenna facing away from both the 

Signal Booster and outside Cradle Antenna .

CORRECT

Recommended 18 inches minimum

antenna Placement

The location of the SIGnALBOOST DT with the Desktop Antenna in relation to the outside Cradle Antenna is 

very important . Once you find a good signal location for the outside Cradle Antenna, the Signal Booster and 

Desktop Antenna need to be located 

behind it

 to reduce the possibility of oscillation (feedback) (indicated by 

a red indicator light on the Signal Booster) . In other words, the front of the outside Cradle Antenna (indicated 

by the Wilson Electronics insignia) needs to face in the direction of the cell tower and not in the direction of the 

Signal Booster and the Desktop Antenna (see Figure 3) .

INCORRECT

Summary of Contents for signalboost dt 271265

































Reviews: