WILMS 3100430, Manual

Page: 8 / 34

Set up and transport of the unit
Location Since the appliances contain a flammable refrigerant, the following requirements for
requirements: the location must be fulfilled.
•
The device must be installed, operated
and stored in a room with a area larger than
than 4 m².
Check whether there are any local regulations
that you have to obey when installing
or storing of the device.
•
The device must be stored in a well-ventilated area, with the
room size must correspond to the room areas of 4 m².
•
The device must be installed in a room without permanently
active ignition sources (e.g. open fire, a gas appliance in operation or an
electric air heater in operation).
Optimal
Make sure that the room to be dehumidified is closed and the device is not
operation: placed near a heat source, such as e.g. a radiator.
Electrical The dehumidifier is complete with a cable and plug and ready for connection to a
connection: 230 V / 50 Hz socket. Protect the socket with a 10 A fuse or a 16 A circuit breaker.
Warning: If the power cord is damaged, it must be replaced by the manufacturer,
maintenance service or similarly qualified persons in order to avoid danger.
7 of 33