WILMS 3100430, Manual

Page: 10 / 34

Operating Manual
On-/Off- The following table shows the operation of the on-/off-function and the display texts
Switching and
operating status
Push button Display
ON Continuous operation
INT HYG ON
Operation controlled by internal hygrostat
INT HYG STOP
,if the preset value of the internal hygrostat
is reached
EXT HYG ON operation controlled by external hygrostat
EX HYG STOP
,if the preset value of the external hygrostat
has been reached
Switching off
The green LED shows active dehumidification.
Operation of
The following table shows the operation of the hygrostat function and the display texts
the built-in
hygrostat
Step Button
keep
HYG SET RHXX% - flashes for 5 seconds.
pressed The dehumidifier then switches to the controlled operation with
setpoint - when the setpoint is reached,
the following appears on the display:
INT HYG STOP
press Shortly press +/- in order to set the RH%-value in the
(if it mentioned 5 seconds. The new value will be stored after a
flashes) further 5 seconds, when the last button is pressed.
hold
HYG SET RHxxx% - flashes for 5 seconds.
down The dehumidifier switches to continuous operation.
1 x press
HYG Off will flashes. The setting is stored after 5 seconds.
(if it The dehumidifier then switches to the continuous operation.
flashes)
9 of 33
Explanation