WILMS 3100430, Manual

Page: 11 / 34

Operating Manual
Operation of
If an external hygrostat has been connected the unit automatically changes to operation
an external
with this hygrostat.
hygrostat
Changes of the preset value can be done only on the external hygrostat.
(If the preset value has been reached the display shows:
EXT HYG STOP
)
Hour meter:
The built-in hour meter counts the total operating hours (can not be reset) as well as
the hours until the next service which can be changed. The service hour meter is
switched off when the unit is delivered.
Step Button
keep SERVICE xxxxh – shows the hours until next authorised service.
pressed This value is automaticly stored after 5 seconds of flashing and the
function is activated if not already done. When the time for the
service intervall has been reached the display shows:
SERVICE .
Shortly press +/- in order to preset a new service interval.
The new value will be stored 5 seconds after pressing of the
last button.
Hold down
Servive xxxxh - shows the hours until next authorised
until it service.
flashes
1 x press
SET SERVICE OFF - switches the servicetimer function off.
(if it The new value will be stored 5 seconds after pressing the last
flashes) button.
Display texts The following table shows how to operate the operating informations.
Button
XX°C shows the ambient temperature
Actual RH% shows the actual relative humidity
XX kWh shows the total energy consumption
Cannot be reset
xxxxh shows the total operating hours
Cannot be reset
10 of 33
Explanation
Explanation