12
WaveCAST EIGHT
Server Settings Page
The Server Settings page affects settings specific to the server as a whole. The page displays network connectivity settings, as
well as the server name and screen lock. Typically these are not needed after initial installation.
The screen lock will prevent the front panel on the device from being used, forcing all changes and information to be seen via the
web interface. This can also be enabled and disabled from the physical device.
Changing a static IP address or subnet will not instantly take place. The changed IP address or subnet will only take affect once
the device is rebooted. This can be done manually or from the Admin menu.
Note: If the IP address or subnet of the device was changed and the device is being rebooted, the website may not be available at
the same URL location. Take note of the network information before rebooting the device.
TTL can be modified if there is a need. The recommended setting for the least latency is 1, but it can be set up to 31. This setting
should not be adjusted without proper consideration for your system setup.
Additional networking information is described in "Adjusting Network Settings" on page 8.
