OPTIMUM FREEFORM IN-GROUND WITH STEP
Section 2
Section 2
Step 11
– Skimmer Installation
67
11.1 Use the specific gray and white skimmer mounting plates for
for the above ground skimmer or in-ground skimmer.
11.2 Place gray skimmer mounting plate assembly on the inside
Of the pool, and white skimmer mounting plate on the outside
of the panel, sandwiching the skimmer inside the wall panel
cutout. Ensure gaskets are located as illustrated.
Loosely secure assembly with five 2-
¼” countersunk bolts
(#99-0131) and flat-head rivet nuts (#99-0132).
Ensure plates are centered and level, then tighten hardware,
taking care not to overtighten.
11.3 With hardware provided in the skimmer kit, secure skimmer
to the gray skimmer plate with 4 screws. Do not fully tighten
as these screws will be removed later.
NOTE:
Skimmer face plate (in skimmer assembly) and
remaining screws will be attached after pool liner is installed,
locking the skimmer firmly in place. Refer to skimmer kit
installation instructions for more information.
Above Ground
In-Ground
cork
gaskets
silicon
gasket
