OPTIMUM FREEFORM IN-GROUND WITH STEP
Section 2
Section 2
Step 4
– Curved Side Panel Assembly
52
4.8 Two bottom plates included with the pool have only one
mounting hole as pictured in Figure 4.9. These bottom
plates (#77141 & #77142) are to be used on the filler
panels at the step void. There is a specific left and right
anchor plate for these two locations (Figure 5.1).
4.9 Drill one 7/16” hole through each filler panel at the
bottom plate hole location and secure with one 2-
½” bolt
(#99-0137) and nut (#99-0134).
4.8
4.9
Note
– Before step is attached, bring in
sand for the floor and cove of the pool.
(See page 40 for proper quantities.)
#77141 SHOWN
