OPTIMUM FREEFORM ABOVE / INGROUND POOL
Section 1
Section 2
Step 15
– Add Water
34
15.1 Start filling the pool with water after the concrete has cured.
Once the water level reaches 2-
3” from the return fitting
hole, install the faceplates on the return fitting and skimmer
as shown in Figures 16.1 and 16.2.
When faceplates are installed, complete filling the pool until
water level is at the middle of the skimmer opening.
Step 16
– Install Face Plates
16.1 Locate screw holes for each opening in pool wall.
Carefully pierce liner within the frame of the skimmer and
return faceplates with a nail or awl. Attach skimmer and
return faceplates using screws provided in the skimmer kit
and tighten.
16.2 Using a sharp blade, carefully trim liner inside the openings
for skimmer and return openings. Install eyeball (not
included) into return fitting.
16.1
16.2
