OPTIMUM FREEFORM IN-GROUND WITH STEP
Section 2
Section 2
Step 4
– Curved Side Panel Assembly
53
4.10 Ensure panels are centered and fully inserted into the
bottom plates.
At this time, on the curve side ONLY, drill 7/16" holes through the
pool panels at the bottom plate hole locations using the bottom
plate holes as a drill guide. Secure panels with 2-
½” bolts (#99-
0137) and nuts (#99-0134).
4.11 Use the included rebar with a concrete collar around the
perimeter of the pool. Insert the rebar halfway into the ground
through the anchor plate holes before pouring the concrete collar.
4.11
4.10
