OPTIMUM FREEFORM ABOVE / IN-GROUND POOL
Section 1
Section 2
Step 5
– Freeform Side Panel Installation
22
5.7 Place the A-frame cover foam Insert (#77069) inside
the top section of the A-frame cover (#77036).
Install the A-frame upright (#77033) along with the A-frame
cover assembly onto the pool wall. Secure to pool wall with
two 2” countersunk SS bolts (#99-0130) and two flat head
rivet nuts (#99-0132).
NOTE: Reverse bend panels will be attached with the
longer 2-
¼” countersunk SS bolts (#99-0131)
At this time the A-
frame will be “floating” until the concrete is
poured in the trench. Ensure A-frame assembly is perfectly
upright to avoid issues later.
5.8 Repeat step 5 for all remaining freeform panels.
NOTE
– Before final panels are attached, bring sand
into the interior of the site for the sand base and cove.
Please refer to page 9 for the required quantity of sand.
5.7
5.8
INDENT PANEL SHOWN
#77069
#77036
