OPTIMUM FREEFORM / IN-GROUND POOL
Section 1
31
Step 11 - Installing Top Coping (continued)
11.5 For pools that are installed into a hillside and will utilize
both 2” PVC top coping and CP2 coping as illustrated
below, there is a transition kit available (#77268). This kit
includes two stainless steel plates to cap off the ends of the
CP2 coping to give a finished edge.
Bend the lower tab on the end plate as seen in Figure 11.5.
Attach the end plate with #10 x ¾” Tek screw (#99-0090)
through the CP2 coping and into the coping adaptor clip
(#77176). Repeat on the opposite end.
11.5
11.6
CP2 END CAPS
#77268