OPTIMUM FREEFORM IN-GROUND WITH STEP
Section 2
Section 2
Step 6
– Freeform Side Panel Installation
60
6.7 Place the A-frame cover foam Insert (#77069) inside
the top section of the A-frame cover (#77036).
Install the A-frame upright (#77033) along with the A-frame
cover assembly onto the pool wall. Secure to pool wall with
two 2” countersunk SS bolts (#99-0130) and two flat head
rivet nuts (#99-0132).
NOTE: Reverse bend panels will be attached with the
longer 2-
¼” countersunk SS bolts (#99-0131)
At this time the A-
frame will be “floating” until the concrete is
poured in the trench. ensure A-frame assembly is perfectly
upright to avoid issues later.
6.8 Repeat step 6 for all remaining freeform panels.
NOTE
– Before final panels are attached, bring sand
into the interior of the site for the sand base and cove.
Please refer to page 40 for the amount of sand required.
6.7
6.8
INDENT PANEL SHOWN
#77069
#77036
