17
WIKA operating instructions, models CTH63I0 and CTH65I0
EN
14120692.02 01/2019 EN/DE
Connecting/replacing the temperature probe
1. Switch off the instrument to connect or change the temperatrue probe.
2. Before switching the instrument on, connect the temperatrue probe, otherwise it may
not be correctly identified by the instrument.
3. Do not apply force to plug the connector into the socket.
The digital instrument and the temperature probe are connected to each other electrically
by means of a separate connection cable.
For probe replacement please pay attention to the following:
■
Do not apply force to plug the connector into the sockets.
■
To connect the temperature probe to the hand-held plug the 8-pin plug connection
according to the guiding into the connection port for temperature probes.
■
Connect the connector without crossing the threads. If the connector is positioned
correctly, it can be plugged in without any significant effort.
■
To disconnect the probe, do not pull on the cable, but rather only on the connector
sleeve.
4.6 USB interface
DANGER!
Danger to life from explosion!
Through working in flammable atmospheres, there is a risk of explosion
which can cause death.
▶
Using the USB interface is not allowed in hazardous areas!
The model CTH63I0 or CTH65I0 has a USB interface as standard. The serial data
transmission can be used for configuration, calibration and for the transmission of
measured values from the hand-held thermometer.
4. Design and function
