30
WIKA operating instructions, model CPH6400
11313439.04 12/2012 GB/D
GB
6. Commissioning, operation
In the "
LOGGER SOURCE
"
FUNC
menu item, the data source for the data logger can
be selected. Via the
MODE
key pressure "
PREAS
" is selected, and via the
UNIT
key
temperature "
TEMP
" is selected.
FUNC
Return to the standard measuring mode by pressing the FUNC key several
times.
The USB interface is deactivated by switching off the CPH6400. In order to activate the
USB interface once again, follow the process described above.
The WIKA "PrintCal" PC-Software is available as calibration and evalua-
tion software.
FUNC
Return to the standard measuring mode by pressing the FUNC key several
times.
6.8.3 Data source for Data logger (LOGGER SOURCE)
Via the
FUNC
key various configurations can be achieved, e.g. the data source for the
data logger can be selected.
Activating the Data Source for Data Logger menu item (LOGGER SOURCE)
Pressing the FUNC key three times* (directly within the measuring mode
).
* If you already are in a
FUNC
menu item, press the
FUNC
key until the "
LOGGER SOURCE
" menu item
appears.
