31
WIKA operating instructions, model CPH6300
EN
14043054.02 08/2017 EN/DE
5. Commissioning, operation / 6. Faults
6. Faults
Personnel:
Skilled personnel
Protective equipment:
Protective gloves and safety goggles
Tools:
Spanner or torque spanner
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the
instrument must be taken out of operation immediately.
▶
Ensure that pressure or signal is no longer present and protect against
accidental commissioning.
▶
Contact the manufacturer.
▶
If a return is needed, please follow the instructions given in chapter
8.2 “Return”.
5.10 Alarm
3 settings are possible:
■
Alarm off
AL
.
oFF
■
Alarm on with buzzer
AL
.
on
■
Alarm on without buzzer
AL
.
no
.
so
In the following cases, if the alarm function is activated (
on
or
no.So
), an alarm will be
raised:
■
Value below lower alarm limit
AL
.
Lo
■
Upper alarm limit
AL
.
Hi
exceeded
■
Sensor error
■
low battery
bAt
■
Err.7: System error (always indicated with a buzzer)
