28
WIKA operating instructions, model CPH6300
EN
14043054.02 08/2017 EN/DE
Each save operation will be signalled briefly on the display with “St.XXXXX”.
XXXXX is the number of the data set.
Lo66 FULL
Shows in the event the logger memory is full. The recording will be
stopped automatically.
Lo
.
Po
=
on
Appears with the low-power logger function.
As soon as the logger memory is full, the instrument switches itself off.
5.5.2.2 Stopping the logger recording:
1. Press the
[STORE/QUIT]
button for
2 seconds.
⇒
If a recording is running, the stop menu is displayed.
2. Press the
[
▲
]
or
[
▼
]
button.
⇒
Change the selection.
SToP no
Do not stop recording (cancel the process).
SToP yes
Stop recording.
3. Press
[STORE/QUIT]
button.
⇒
Confirmation of the selection, logger recording ended.
If you try to switch off an instrument during a logging cycle, you will
automatically be asked if you wish to stop recording.
The instrument can only be switched off after the recording has been
stopped.
The auto power-off function is deactivated during recording!
5.5.2.3 Clearing logger recording
1. Press the
[STORE/QUIT]
button for
2 seconds.
⇒
In the case where there is logger data present, and the recording has already
been stopped,
Lo66 rvn
is shown
2. Press the
[
▲
]
or
[
▼
]
button.
⇒
Change the selection to
Lo66 CLr
in order to call the “Delete” function.
3. Press the
[
▲
]
or
[
▼
]
button.
⇒
Change the selection.
CLr no
Do not delete (cancel the process).
CLr ALL
Delete all data sets.
CLr LASt
Clear the last data set.
5. Commissioning, operation
