Configuration
Wieland Electric GmbH | BA000966 | 08/2017 [8151]
69
Configuration
888528267
ATTENTION
Check the protective function before commissioning and after any change!
If you change the configuration, you must check the effectiveness of the protective function.
To this end, note the test instructions in the operating instructions for the connected safety
equipment.
Additional information
For configuring the samosPRO system, you will require the samosPLAN
6 software and the SP-
COP-CARD1 program removable storage.
The configuration and verification of devices that are connected to the safety control generally
does not take place using the samosPLAN
6 software. These devices have their own mecha-
nisms for configuration and verification.
• The system configuration of the entire samosPRO system is stored in the program remo-
vable storage. This has the advantage that the system does not have to be reconfigured
when modules and/or gateways are replaced.
• The data stored in the program removable storage will be retained even if the supply vol-
tage is interrupted.
• It is possible to transfer configuration information via the USB or Ethernet interface.
8
Summary of Contents for samos PRO COMPACT
Page 1: ...samos PRO samos PRO COMPACT Hardware Manual Doc no BA000966 Last Update 08 2017 8151...
Page 103: ...Appendix Wieland Electric GmbH BA000966 08 2017 8151 103 Declaration of Conformity Page 2...
Page 104: ...Appendix Wieland Electric GmbH BA000966 08 2017 8151 104 Declaration of Conformity Page 3...
Page 105: ...Appendix Wieland Electric GmbH BA000966 08 2017 8151 105 Declaration of Conformity Page 4...
