Wieland samos PRO COMPACT, Manual

Page: 108 / 124

Appendix
Wieland Electric GmbH | BA000966 | 08/2017 [8151]
108
Error No. Error type Logbook message System behavior Remedy
10100012 Error The controller could not respond
positively to the request. Remains connected Repeat
support request
10100013 Error The maximum number of repeated
requests is exceeded. Separate connection Repeat
support request
10100015 Error Connection cannot be set up to the
controller. No connection Check connection
support request
10100016 Error The password for the user to be
logged on is invalid. Remains connected Check password
10100017 Error The controller could not adopt the
desired state. Remains connected Repeat
support request
10100018 Error The station's memory card is not
inserted. Separate connection Insert valid SD card
10200002 Error The project on the control is invalid. No connection Transfer a new valid
project
10200003 Error The verification status of the project
and controller are different. No connection Reverify the project
10200004 Error The PC project and the project on
the controller could not be synchro-
nized.
No connection Disconnect and
reconnect
support request
10200005 Error The current user does not have au-
thorization to communicate with the
controller.
Connection was disconnected.
No connection Redefine the user
rights
10200006 Warning The project on the controller does
not match the module configuration. Remains connected Adjust hardware or
project
10200007 Error The controller reports an error. - Support request
10200008 Error The controller reports a deviating
CRC in the project file. - Repeat of
Support request
work step
10200009 Error The permissible waiting time for the
operation was exceeded. - Repeat
support request
1020000A Info The verification has been interrup-
ted. - Repeat
support request
1020000B Warning The faulty project file is still in the
station and must be replaced by the
updated project file.
Please reconnect and load the up-
dated project on the station.
- Update the device
with the repaired
project
10300001 Error The data of the logic analyzer could
not be saved. - Check Windows user
rights
10300002 Error The data of the logic analyzer could
not be loaded. - Repeat
support request
10300003 Error Input/output was not found. - Support request
10400001 Error The log messages could not be sa-
ved. - Check Windows user
rights
10400002 Error The file contains more than 64 log
messages. Only the first 64 were
imported.
- Reduce the number
of log messages
10400003 Error The log messages could not be im-
ported. - Support request
10500001 Error The logon on the controller was
faulty. - Repeat
support request