Wieland podis MOT FP C, Operation Manual

Page: 7 / 64

.5 Wieland Electric | BA000349 | 05.2007
1 | General Information
.4 About these operating instructions
These operating instructions provide support for the installation, commissioning, and mainte-
nance of the podis MOT FP C/CM/CP 2I2IO/RS485 SEW.
It contains instructions for programming, configuring, and parameterizing the field distributor.
These operating instructions contain the information required for the as-intended use of the
product described herein
podis systems may be installed only by qualified personnel while adhering to the respective
regulations of the VDE (Association of German Electricians). For this reason, these operating
instructions are intended for technically qualified personnel (e.g. skilled persons, electrical
engineers) who is either
• familiar with the safety concepts of automation technology as project planning and pro-
gramming personnel, or
• trained in handling equipment of automation technology as operating personnel and famil-
iar with the contents of these instructions pertaining to the operation, or
• trained as installation, commissioning, and maintenance personnel which enables them
to perform operations on equipment of automation technology and who is authorized to
commission, ground, and identify electrical circuits and devices or systems according to
the standards of safety engineering.
Special requirements are:
• Basic knowledge of PROFIBUS-DP technology
• Basic knowledge of decentral drive systems
These operating instructions use different safety instructions depending upon the hazard poten-
tial:
DANGER
"Danger" identifies a direct dangerous situation or a direct dangerous condition which,
if not avoided, causes serious injuries or death. The use of this sign is restricted to
extreme situations.
WARNING
"Warning" identifies a potentially dangerous situation or a potentially dangerous conditi-
on which, if not avoided, may cause serious injuries or death.
CAUTION
"Caution" identifies a potentially dangerous situation or a potentially dangerous conditi-
on which, if not avoided, may cause minor or non-serious injuries or death. "Caution" is
also used to warn about unsafe handling or obvious misuse. "Caution" is also used for
situations in which property damage or personal injuries may occur.
Content of
these operating
instructions
Content of
these operating
instructions
Safety informa-
tion
Safety informa-
tion
Intended users
of these operat-
ing instructions