Wieland podis MOT FP C, Operation Manual

Page: 25 / 64

4. Wieland Electric | BA000349 | 05.2007
4 | Electrical Installation
4 Electrical Installation
The podis CON manual BA000372 must be taken into account for the routing and connection
of the flat cable.
• All electrical installations and connections may be performed only by trained electricians.
• The applicable safety and accident prevention regulations must be observed.
• The connectors may never be connected or disconnected under load.
• Before opening and removing the electronics cover, the entire flat cable must be de-ener-
gized.
• When routing extra-low voltage circuits together with low-voltage circuits using one line,
the line must be protected against mechanical damage in areas of risk, e.g. cable channel,
steel pipe or similar protection.
4. Connection to the podis
®
energy bus
��
��
��
�
�
�
��
Core PVC (gray, 7 x .5 mm ) EVA (black, 7 x 4 mm )
L1 brown 1 (black)
L2 black 2 (black)
L3 gray 3 (black)
N blue 4 (black)
PE green/yellow PE green/yellow
+ red 5 (black)
- white 6 (black)
The illustrated assignment of cores in the podis flat cable must be followed for the field dis-
tributor to ensure proper operation.
The auxiliary voltage for the supply of the outputs and inputs must be taken from a safely
isolated power supply (PELV acc. to IEC 60364-4-41)!
NOTE
The podis flat cable is coded, thereby preventing an incorrect insertion.