All information, illustrations and specifications in this manual are based on the latest information available at the time of
publication. The right is reserved to make changes at any time without notice.
21
2.0. Assembly
2.8. Installing moving gear with drawbar
Two persons are required for
attachment without equipment.
The load for attachment is
55 lb. (25 kg).
Attach basic unit to
points
(A and B)
.
Fix cylinder bearing
(C)
into
the matching hole on the frame
on both sides.
Tap out expansion pin on both
machine supports.
Lift basic unit with hoist to
remove the machine supports.
Insert cross member
(E)
as
shown in Figure
499.24
into the
bottom hole of the attachment
shackle and lock it.
Fasten wheels with their
bracket
(F)
to the cross
member
(E)
.
Insert hydraulic cylinder
(G)
into the hole
(H)
in the wheel
bracket
(F)
and lock it.
