All information, illustrations and specifications in this manual are based on the latest information available at the time of
publication. The right is reserved to make changes at any time without notice.
37
7.0. Operation
7.4. Faults and remedies
Description Cause Remedy
Weigh frame down with
additional weight
When adding ballast note the
approved total weight
Ground is too dry or too
compact
Work area twice
Machine weaves from left to
right
Rocky subsurface
Reduce the working depth.
Weigh frame down with
additional weight
When adding ballast note the
approved total weight
Ground is too dry or too
compact
Work area twice
Too many tines in use
Reduce the number of tines by
half
Hydraulic weight transfer
incorrectly adjusted
Desired working depth not
achieved
Rear roller incorrectly set
Check adjustment and
readjust if necessary
Intensive blades rip up the turf Ground is too clayey or boggy Rotate tines 180 degrees (see
Chapter 2.2. Figure 499.65)
Driving in curves during
operation
Do not drive in curves
Tines break
Rocky subsurface
Reduce the working depth.
