Wiedenmann TERRA SLIT Operating Instructions Manual Download Page 24 | Manualshive

Page: 24 / 55

background image

All information, illustrations and specifications in this manual are based on the latest information available at the time of

publication. The right is reserved to make changes at any time without notice.

24

3.0. Transport

3.2. Transporting the TERRA SLIT

ATTENTION DANGER:

Be careful when cutting through
the tension straps. There is a
risk of being injured when the
straps are cut.

3.2.1. Transport Using a Forklift

If the TERRA SLIT is still
fastened to the pallet :

•

move the forks into the
shipping frame, (note
direction of approach)

•

carefully raise the shipping
frame,

•

unload the TERRA SLIT from
the carrier vehicle when
balanced,

•

cut through the tension
straps,

•

attach the TERRA SLIT to the
tractor and lift it from the
pallet (See item 4.2.).

3.2.2. Transport Using a Crane

•

Attach ropes or belts to the
ring bolts (A) and the top
hole (B) of the outer
connecting plates.

•

Unload the TERRA SLIT when
it is securely suspended.

NOTE :

Inform the transport company
and Wiedenmann GmbH or the
supplier immediately in writing
about shipping damage or
missing parts.

«
...
22
23
24
25
26
...
»

Summary of Contents for TERRA SLIT
























































Reviews:

No comments

Related manuals for TERRA SLIT

Brand: Makita Pages: 84

Brand: NAD Pages: 10

Precision2 HP2 Series

Brand: B-K lighting Pages: 6

Brand: B-K lighting Pages: 3

Brand: Eazyzap Pages: 32

Brand: Eaton Pages: 16

Brand: Ecco Pages: 17

Brand: Madrigal Pages: 5

Brand: MacDon Pages: 504

Brand: Madsen Pages: 206

Brand: Additel Pages: 139

Brand: Vatech Pages: 68

Brand: Varytec Pages: 52

Brand: Exmark Pages: 36

Brand: Reflex Marine Pages: 36

Brand: Qtx Pages: 6

Brand: Waldbeck Pages: 32

MHL 108 WASH 150.509

Brand: Beamz Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands