All information, illustrations and specifications in this manual are based on the latest information available at the time of
publication. The right is reserved to make changes at any time without notice.
28
4.0. Connecting to the Tractor
4.3. Attachment to the tractor
Prerequisite for connecting:
•
a three-point hitch.
NOTE:
With the three-point linkage it
is essential that the assembly
categories of the tractor and
machine match each other.
Mounting steps:
1.
Remove bottom connecting rod
at pin (1a for cat.1 or 1b
for cat.2) and lock with linch
pin (2).
2.
Mount the upper links follows:
depending on the tractor, insert
the bolt for category 1 with
diameter (3a) and fix it with
the cotter key (4).
Or, for attachment with
category 2, use diameter 3b.
3.
Tighten the tension lock of
the stabilizing chain.
4.
Position the two machine
supports in the top position
and lock.
During operation the machine
supports are in a position in
which they become the hoop
guard.
ATTENTION DANGER !
Check that it is correctly
connected before starting
operation.
