All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
28
6.0. Maintenance
6.3. Cleaning
CAUTION DANGER
Clean with a hand brush or
water only never with your bare
hands.
RISK OF INJURY !
Clean the machine daily after the work
is finished to ensure faultless
functioning when it is next used.
Only cleaned cylinder brooms ensure
optimal functioning.
6.4.
Check and tension the drive V-belts
Release screw (A)
Remove protective cover (B)
Release locknut (C)
Check V-belt tension on a regular
basis.
The V-belt must press between the
belt pulleys by about
3,4 mm at a load of 250 N.
ATTENTION!
V-belt must not touch the pivot
point (D)!
Insert screw (C) until the
values for the correct V-belt
tension are reached.
Attach protective
cover (B) and secure using
screw (A)
3
,4
m
m
250 N
2350.39
