All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
27
6.0. Maintenance
6.1. General
CAUTION DANGER
Carry out maintenance work only
with the equipment installed.
Switch off the tractor and
secure it against inadvertent
starting.
Check security of screw fittings on a
regular basis and tighten if necessary.
Replace wear parts in good time.
Use original spare parts only.
Shut the machine down before carrying
out maintenance / repair work.
Reinstall guard decays after
maintenance / repair work.
6.2.
Changing the cylinder broom
Release nut (A).
Remove cover disc (B).
Remove cylinder broom.
Slide new cylinder broom onto
shaft axle.
Slide cover disc (B) onto
shaft axle and insert into
recesses
of the cylinder
broom.
To secure the cylinder broom,
tighten nut (A) to a
specified torque of 35 Nm.
