All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
18
2.0. Connecting
2.9. CARDAN SHAFT ADJUSTMENT
Connect the cardan shaft and
check that it has the correct
length in working position and in
raised position; shorten if
necessary. Secure cardan shaft
guard with attached chain.
For adjusting the length hold
the two shaft parts side by
side within the shortest
operating position and mark
them out.
Cut off the inner and outer
sliding profile by the same
length as the sheath tube.
Cut off the inner and outer
sheath tube evenly.
Smooth off division edges,
remove chips carefully.
Lubricate sliding profile.
