All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
14
2.0. Connecting
2.1. General
Ensure that the tyre pressure of the
vehicle tyres is correct.
Please observe the following when
selecting the correct mounting points
(for the installed parts):
1.
Lowest position of
tractor - frontal lifting
2.
Top position of tractor - frontal
lifting
3.
Clearance for the p.t.o shaft
4.
Enough clearance between sweeping
machine and ground in order to
overcome obstacles (e.g. kerbs).
5.
Installed sweeping machine must be
in float position in order to be
able to adapt to the unevenness of
the ground.
6.
The protective cover of the V-belt
must be parallel to the ground.
Setting is made via the tractor's
upper link.
2.2.
INSTALLATION WITH STANDARD THREE-POINT LINKAGE CAT.1
The installation stand is as standard
equipped with category I connection
components.
U Insert and secure the lower link
to the installation stand using
suitable pin (A).
Insert and secure upper link with
plug (B) to suitable bore hole of
the installation stand.
Mount the PTO shaft.
Raise sweeping machine with front
hydraulics.
