Kunststoffschweißtechnik
Maintenance / Storage / Transport
Chapter 6
08.10.14 Working
instructions
WIDOS RSC 2000
Page 34 of 63
6.6. Service
unit
When the level of the condensate is about 10 mm under the filter element:
Open the bleeder screw by turning it in anticlockwise direction (seen from below) to let off the
condensed water.
With less flow despite same pressure setting:
Replace the filter element
Exhaust the system and the unit
Unscrew the filter bowl in an anti-clockwise direction
Grasp the new filter element only at the lower end
Refit the parts in the reverse order from dismantling
Recommission as described in chapter “settings" (see chapter: 4.7.1)
6.7. How to protect the machine parts against corrosion
In case of air humidity of > 85 % and / or high temperatures you must treat the untreated steel
parts of the machine with anti-corrosive protecting agent (e.g. AVILUB NCI 9840).
6.8. Disposal
At the end of their lifetime, the machine and the wear parts have to be disposed
of properly and environment-friendly, in accordance with the national laws
regulating waste disposal.
