widos 4900 CNC 3.5 Working Instructions Translation Download Page 14

Page: 14 / 69

Ku nst sto ffschweißtec hni k

Safety rules

Chapter 2

02.08.2011

Working Instructions WIDOS 4900 CNC 3.5

Page 14 of 68

2.10. Warranty and liability

Fundamentally our "General Sales and Delivery Conditions" are valid.

They are at the owner's disposal latest when signing the contract.

Guarantee and liability demands referring to personal injuries or damages on objects are
excluded if they are caused by one or several of the following reasons:

•

not using the machine according to the prescriptions

•

inexpert building-up, starting, operating, maintenance and transport of the machine

•

running the machine with defective or not orderly mounted safety appliances

•

ignoring the information given in this manual

•

structural modifications on the machine without permission

•

unsatisfactory checking of parts of the machine, which are worn out

•

repairs performed in an inexpert way

•

In case of catastrophes and force majeure

Summary of Contents for 4900 CNC 3.5






































































Search results

Summary of Contents for 4900 CNC 3.5

Reviews:

Related manuals for 4900 CNC 3.5

Brands by name

Popular brands

widos 4900 CNC 3.5, Working Instructions Translation

Search results

Summary of Contents for 4900 CNC 3.5

Reviews:

Related manuals for 4900 CNC 3.5

Brands by name

Popular brands