Ku nst sto ffschweißtec hni k
Starting and operating
Chapter 5
02.08.2011
Working Instructions WIDOS 4900 CNC 3.5
Page 30 of 68
Display:
2
nd
line:
closing machine
measuring dragpress
after a few seconds, the display changes
Display:
2
nd
line:
bead up
Ps=000 Pi=000 P
0
0.0
The bead up pressure is displayed
Display shows alternating bead up pressure and heating element temperature
Display:
2
nd
line:
bead up
heat.elem.t. 000°C
The heating element temperature is displayed
after the bead height being reached, the display changes
Display:
2
nd
line:
heat up Taw= 0000s
heat.elem.t. 000°C
Remaining heating time
Heating element temperature
5 seconds before end of the heating time you will hear several beeps
Display:
2
nd
line:
change over
remove heating elem
Take heating element out of the machine directly
after a few seconds, the display changes
Display:
2
nd
line:
change over
after a few seconds, the display changes
Display:
2
nd
line:
ramp Tf= 000s
Ps=000 Pi=000 P
0
0.0
Remaining pressure build-up time (sec)
after a few seconds, the display changes
Display:
2
nd
line:
cooling Tk=00:00
Ps=000 Pi=000 P
0
0.0
Remaining cooling time (min and sec)
