Ku nst sto ffschweißtec hni k
Safety rules
Chapter 2
02.08.2011
Working Instructions WIDOS 4900 CNC 3.5
Page 13 of 68
2.8.2. Danger of catching clothes by the planer
You can cut yourself or even get bones broken!
For some machines the planer may shortly turn when switching the machine on!
•
Only wear clothes tight to the body.
•
Do not wear rings or jewellery during the work.
•
If necessary wear a hair-net.
•
Always put the planer back into the reception box after and before each use.
•
Only transport the planer at the handle. Do not touch the surfaces.
2.8.3. Danger of being burnt by heating element and welding area
You can burn parts of your body and inflammable materials can also be ignited!
The heating element is heated up to more than
200°C
!
•
Do not touch the surfaces of the heating element.
•
Do not leave the heating element unsupervised.
•
Take enough safety distance to inflammable materials.
•
Do wear safety gloves.
•
Always put the heating element back into the reception box after and before each use.
•
Only transport the heating element at the handle.
2.8.4. Danger of squeezing by clamping devices and guideways
There is a danger of serious injuries: on the one hand between the inner clamping
devices and on the other hand between the outer clamping device and the end of
the guideway.
•
Do not stand or put hands between clamped pipe ends.
•
Do not stand or put hands between the inner clamping tools with not yet clamped pipes.
•
Do not block opening and closing of the machine sledge.
2.9. Structural modifications on the machine
•
No modifications, extensions or reconstructions may be made on the machine without
permission of the manufacturer. In cases of non-compliance, any guarantee and liability
demands shall expire (see chapter 2.5).
•
Machine parts which are not in a perfect condition are to be replaced immediately.
•
Only use original
WIDOS
spare and wear parts.
•
In case of purchase orders please always state the machine and version number !
