Kunststoffschweißtechnik
Operating and indicating elements
Chapter 4
14.08.15
Working Instructions WIDOS 16000 mobile
Page 21 of 63
4.4. Pipe cutter
The cutter drives between both pipe ends in order to cut them.
Swing the cutter into the machine and then laterally drive it into the left clamped pipe until the
left blade is appr. 3-5 cm within the pipe.
The cutter must be fixed in this position.
Drive the right pipe to the cutter thus far that the right blade are appr. 3-5 cm within the right
pipe.
As soon as the pipe cutter is rotating, it drives appr. 1 mm per rotation to the outside, in cutting
direction (arrow).
The top of the cutter features cutting
blades on both sides in order to cut
the pipe from inside to outside.
4.4.1. How to fix the pipe cutter
00
Knife
Hexagon for cordless screwdriver
Locking bolt in lower
holder
Insert and pull out the
bolt with handle in
horizontal position
Vertical handle position
Bolt fixes the cutter
below the guiding rod
Upper holder to place
the bolt after cutting
