Kunststoffschweißtechnik
Operating and indicating elements
Chapter 4
14.08.15
Working Instructions WIDOS 16000 mobile
Page 23 of 63
4.5. Switch cabinet
No.
Denomination / Function
19
Heat sink
20
Temperature regulator, to set the required temperature
21
Control lamp <Oil temperature>, at 80°C the lamp illuminates and indicates that
the pump is switched off
22
Main switch, to switch on / off the machine
23
Connecting cable with plug CEE-125A
F1
Circuit breaker, 3 x K25A; hydraulic pump
F2
Circuit breaker K8A, control fuse
F10
Motor protective 9-12A, hydraulic pump
F20
Circuit breaker, 3 x B63A; heating element
F40
Motor protective 27-32A, pipe cutter
Q10
Soft starter hydraulic pump
Q40A-C
Contactor pipe cutter
T2
24V – switch supply unit
XS2
Plug socket control panel
XS6
Plug socket hydraulic
4.5.1. Control lamp oil temperature
The oil temperature is supervised in order that the hydraulic may not get damaged.
As soon as the oil temperature reaches ≥ 80°C, the pump switches off and the signal lamp
illuminates in red.
If the oil temperature has fallen to appr. 70°C, the pump switches on again automatically and
the signal lamp extinguishes.
19
20
21
XS2
F20 / F1 / F2 / F10 /
F40 / Q40 /
XS6
Q40A-C /Q10 / T2
23
22
