Kunststoffschweißtechnik
Operating and indicating elements
Chapter 4
14.08.15
Working Instructions WIDOS 16000 mobile
Page 22 of 63
•
In order to fix the cutter, turn the locking bolt into horizontal position and pull it out of the
upper holder.
•
Insert the locking bolt, the handle being horizontal, into the drill hole and necessarily swing
the handle into vertical position afterwards.
•
Now you may start cutting.
•
Remove the locking bolt after cutting and store it in the upper holder.
4.4.2. How to align the blade to inner pipe diameter
You may also adjust the blades to the
pipe inner diameter by the cordless
screwdriver.
Suggestion: Drive the blades towards the
pipe inner diameter at a short distance
and start cutting by the remote control
afterwards.
Make sure that nobody can start the cutter by the remote control while you shift
the blades back and forth by the portable screwdriver!
Always
drive the arms with the blades
completely in
by the cordless
screwdriver before you swing them in or out (short arms), into initial position in
order that the clamping tools do not collide while inserting the arms.
Apply cordless screwdriver here
