Ku nst sto ffschweißtec hni k
WIDOS
Einsteinstr. 5
Phone ++49 7152 9939 - 0
W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen Fax
++49 7152 9939 - 40
website: www.widos.de
email: [email protected]
30.07.12
Working Instructions WIDOS 10000 mobile
Page 6 of 52
1. Description of the product
This chapter gives important basic information about the product and its prescribed use.
All technical details of the machine are put together as a general arrangement.
1.1. Usage and purpose-oriented use
The WIDOS
10000 mobile
has been designed for the heating element butt welding of pipes and
fittings with a diameter of OD 1000 (optional OD 500 mm up to 900 mm).
Pipes with Ø = 1000 mm can be clamped without any reducer insert (for other diameters, optional
reducer inserts with OD 500 up to OD 900 are necessary).
It is a machine for construction sites and particularly designed for the usage on-site, as well as in
the workshop.
The machine features a carriage with towing bar and may be thereby handled conveniently on a
construction site.
It is not suitable and not permitted for road traffic.
All use going beyond is not purpose-oriented.
The manufacturer is not responsible for damages caused by misuse.
The risk is held only by the user.
Also part of the purpose oriented use is
•
respecting all the indications of the working instructions and
•
performing the inspection and maintenance work.
1.2. Safety measures
In case of wrong use, wrong operation or wrong maintenance, the machine itself or products
standing nearby can be damaged or destroyed.
Persons being in the endangered area may be injured.
Therefore these working instructions have to be thoroughly read and the corresponding safety
regulations must be necessarily adhered to.
1.3. Conformity
The machine corresponds in its construction to the valid recommendations of the European
Community as well as to the according European standard specifications.
The development, manufacturing and mounting of the machine were made very carefully.
