Ku nst sto ffschweißtec hni k
Maintenance, care and repair
Chapter 7
30.07.12
Working Instructions WIDOS 10000 mobile
Page 32 of 52
7.10. Protect machine parts against corrosion
In case of air humidity of > 85 % and / or high temperatures, you must treat the untreated steel
parts of the machine with anti-corrosive protecting agent (e.g. AVILUB NCI 9840).
7.11. Transport
•
Shut the clamping rings and clamp them.
•
Drive planer and heating element into position in a way that both tools fit between the clamping
rings.
•
Swing heating element and planer one after the other into the machine for the transport.
•
Hinge the machine to a suitable tractor unit for the transport within the construction site.
The machine is not suitable and permitted for road traffic.
For further transport routes replace the venting screw at the planer housing by the
locking screw (chapter: 5.1)
7.12. Disposal
At the end of the life time, the machine has to be disposed of properly, non-
polluting and in accordance with the national laws of waste disposal.
